TP-Link TL-SG1210PP 10-Port Gigabit Switch | 2× PoE++ 60W + 6× PoE+ 30W | 123W Budget

Your PTZ camera or outdoor AP is pulling more than 30W and your current switch can't keep up. The TL-SG1210PP gives you two PoE++ ports at 60W each for the hungry devices, plus six PoE+ ports at 30W for the rest. 123W total budget means you're not rationing power across your site. Extend Mode pushes data and power out to 250m — no mid-run injector needed. If a device drops or hangs, Auto Recovery reboots it without you walking over to check. Isolation Mode separates client traffic in one click. Five-year warranty on the unit itself. Plug it in, run your cables, sorted

• 2× PoE++ (802.3bt) ports at 60W each for high-draw PTZ cameras and outdoor APs
• 6× PoE+ (802.3at) ports at 30W each; 123W total PoE power budget
• Extend Mode: up to 250m data + power range on a single cable run
• PoE Auto Recovery automatically reboots dropped or unresponsive PDs
• Isolation Mode and Priority Mode for one-click traffic separation and QoS control
• 5-year warranty; plug-and-play with no configuration required