Same five-port gigabit layout as the MPE, but the power budget sits at 65 W. If your site runs two cameras and a single AP, you don't need extra headroom. This one still gives you up to 32 VLANs, traffic prioritisation, IGMP snooping, and PoE Auto Recovery so a dropped device reboots itself without a site visit. Plug it in and skip the config, or open the web GUI when you're ready to segment your network. Fanless. External 53.5 VDC adapter included
| brand | TP-LINK |
| model | TL-SG105PE |
| port_count | 5 |
| port_speed | 10/100/1000 Mbps |
| poe_ports | 4 |
| poe_standard | 802.3af/at |
| poe_per_port_max | 30 W |
| poe_total_budget | 65 W |
| switching_capacity | 10 Gbps |
| packet_forwarding_rate | 7.44 Mpps |
| mac_address_table | 2K |
| vlan_support | Up to 32 (out of 4K VLAN IDs) |
| design | Fanless |
| power_supply | External adapter, 53.5 VDC / 1.31 A |
| management | Web-based GUI |
| category | Networking |
| subcategory | Switches |
