You need 300Mbps over a long 5GHz link and the single-stream units just can't deliver the throughput your cameras or office backhaul requires. The CPE610 pairs a 23dBi high-gain directional 2×2 MIMO antenna with a dedicated metal reflector for a tight beam, 9° azimuth by 7° elevation. Transmit power up to 29dBm (790mW), adjustable in 1dBm steps so you can dial it in for your exact separation distance. IP65-rated enclosure handles dust and water, 15kV ESD and 6kV lightning protection for the pole-top install outside your regional office or on the property. Snap-lock assembly keeps the unit stable in strong winds, no wobble after a day on the mast. Pharos MAXtream TDMA improves throughput, capacity, and latency for PTMP networks where multiple clients share the channel. Six operation modes: AP, Client, Bridge, Repeater, AP Router, WISP. Passive PoE at 16–27VDC powers the unit over standard Ethernet, one cable does it all
| brand | TP-LINK |
| model | CPE610 |
| frequency | 5.15–5.85GHz |
| wireless_standard | 802.11a/n |
| max_speed | 300Mbps (40MHz dynamic) |
| antenna_gain | 23dBi |
| antenna_type | 2×2 MIMO directional with dedicated metal reflector |
| beam_width | 9° Azimuth / 7° Elevation |
| transmit_power | Max 29dBm (790mW), adjustable by 1dBm |
| enclosure_rating | IP65 |
| esd_protection | 15kV |
| lightning_protection | 6kV |
| poE | Passive PoE, 16–27VDC |
| processor | Qualcomm 560MHz MIPS 74Kc |
| memory | 64MB DDR2 RAM, 8MB Flash |
| ethernet_ports | 1× 10/100Mbps shielded (LAN/PoE) |
| dimensions_mm | 360 × 280 × 207 (no mount) |
| operation_modes | AP / Client / Bridge / Repeater / AP Router / WISP |
| management | Pharos Control |
