ATEN VS0102 2-Port VGA Splitter with Audio – 450MHz Bandwidth, Up to 1920x1440@60Hz

One laptop. Two screens. And the audio's only coming out of one of them. You've tried a passive splitter and the image is ghosting at the edges.

The ATEN VS0102 splits one VGA video and stereo audio signal into two independent outputs with separate volume control on each side. 450MHz bandwidth handles up to 1920 x 1440 @ 60Hz cleanly — no colour bleed, no soft edges.

Runs up to 30 metres per leg. Cascadable up to three levels, so a single source can feed eight displays if you need it for a training room or multi-screen install.

Built-in RS-232 ports mean your existing controller or PC can manage the splitter without adding another box to the rack. EDID Expert handles the handshake so both screens power up at the right resolution — no "no signal" blinking while you wait.

Plug and play. No drivers. No software.

Add to cart and stop running two cables from the same laptop port

• Splits one VGA video + stereo audio signal to two independent displays with separate volume control
• 450MHz bandwidth supports up to 1920 x 1440 @ 60Hz (VGA, SVGA, UXGA, WUXGA, multisync)
• Up to 30 metres per output leg; cascadable to three levels for up to 8 displays
• Built-in RS-232 serial ports for integration with existing AV controllers or PCs
• EDID Expert auto-selects optimum resolution for smooth power-up on both screens
• Plug-and-play — no software or drivers required