You've got the transmitter in the server room. Now you need the far end to actually drive two displays and still let your operators control the source without walking back down the corridor. The VE814AR is that receiver. It takes the HDBaseT signal over one Cat 5e/6/6a cable up to 100m, splits it into two synchronous 4K outputs, and passes RS-232 and IR control signals in both directions. Your touch screen, barcode scanner, or remote IR blaster keeps working from the display side while the source stays locked in the back room. Long Reach Mode stretches 1080p to 150m if you've got a particularly long run. Ethernet pass-through means a PoE camera or access point on the far end doesn't need its own cable. Digital signage in a school hall, a transport station, or a bar – identical content on two screens, one cable, zero IT tickets. Pairs with the VE814AT transmitter. Add to cart
| brand | ATEN |
| model | VE814AR |
| type | HDBaseT Receiver (Dual Output) |
| max_distance | 100m (Cat 5e/6/6a); 150m 1080p Long Reach Mode |
| cable_type | Single Cat 5e/6/6a or ATEN 2L-2910 Cat 6 |
| video_support | HDMI 3D, Deep Color, 4K |
| max_resolution_4k | 4096×2160 / 3840×2160 @ 60Hz (4:2:0) or @ 30Hz (4:4:4) |
| max_resolution_fhd | 1080p @ 100m; 150m Long Reach |
| hdcp | HDCP 2.2 |
| cec | Yes |
| max_data_rate | 10.2 Gbps (3.4 Gbps per lane) |
| max_pixel_clock | 340 MHz |
| outputs | 2× synchronous HDMI remote outputs |
| rs232 | Terminal Block, 3 pole, 57600 baud, 8 data bits, 1 stop bit |
| ir_channels | 2× Mini Stereo Jack (30–56 KHz) |
| ethernet_passthrough | 1× RJ-45 Female |
| esd_protection | 8kV / 15kV |
| housing | Metal |
| operating_temperature | 0–40°C |
| storage_temperature | -20–60°C |
| humidity | 0–80% RH, non-condensing |
| compatible_transmitter | ATEN VE814AT |
| package_contents | 1× VE814AR Receiver, 1× RS-232 Terminal Block, 1× Power Adapter, 1× User Instructions |
