Machine's in the server room. You're at your desk. The KE6900AT transmitter clips onto the back of the PC or server, grabs DVI video, USB keyboard, and mouse, and pushes it across your network as a clean IP stream. Receiver on the other end hands it all back — 1920 x 1200 @ 60Hz, lossless, zero compression artefacts.
RJ-45 copper or SFP fibre slot. Drop in a 1Gbps SFP module and you're looking at 10 km of run distance. Dual power supplies keep the link alive if one PSU kicks over.
AES-128 encryption on the wire. RADIUS, LDAP, Active Directory, or remote user auth for the access layer. OSD for quick config, RS-232 for serial, Auto MDIX so your patch cable just works.
Point-to-point, point-to-multipoint, multipoint-to-point — or bolt it into a full KVM over IP matrix with the CCKM. Auto-detects every KE6900A device on the subnet. Setup in minutes.
In the box: transmitter, power adapter and cord, 1.8 m KVM cable (DVI-D, USB, Audio), four foot pads, mounting kit, user instructions. Unbox, mount, plug in, configure. You're live before your coffee cools
| brand | ATEN |
| model | KE6900AT |
| category | KVM Switch & Video |
| subcategory | KVM over IP |
| display_type | DVI Single Display |
| video_resolution | 1920 x 1200 @ 60Hz |
| network_connectivity | RJ-45 + SFP slot (1Gbps fibre module, up to 10 km) |
| encryption | AES-128 bit |
| authentication | RADIUS, LDAP, Active Directory, remote user authentication |
| power | Dual power supplies for redundancy |
| features | OSD, RS-232, Auto MDIX |
| topology_support | Point-to-point, point-to-multipoint, multipoint-to-point, KVM over IP Matrix (with CCKM) |
| role | Transmitter |
| package_contents | 1x KE6900AT Transmitter, 1x Power Adapter & Power Cord, 1x KVM Cable (DVI-D, USB, Audio; 1.8m/6ft), 1x Foot Pad Set (4 pcs), 1x Mounting Kit, 1x User Instructions |
