ATEN CE610A DVI KVM Console Extender – 3× ExtremeUSB 2.0 Ports, 1920×1200, 100 m over Cat 5e/6

Your operator's sitting 40 metres down the corridor and you're running a tangle of video cables, USB extension leads, and prayer. Or your kiosk needs a touch panel but the PC's locked in a cabinet two rooms away. One cable should do the job.

The ATEN CE610A runs DVI video and three ExtremeUSB 2.0 ports over a single Cat 5e/6 cable up to 100 metres. That's your display, your peripherals, your touch panel, your file transfer — all on one run. No signal drop at the far end. No hunting for a second cable.

HDBaseT handles the video leg. ExtremeUSB covers the USB side, so you can dangle a barcode scanner, card reader, or full touch panel off the remote unit and it behaves like it's plugged straight into the PC. 1920×1200 resolution at the far end, no scaler box needed.

Built for the setups where 'just run a longer cable' stops working: transport control rooms, medical imaging stations, mall kiosks, industrial floors. If your operator needs the screen and the peripherals but the PC can't be in the room, this is the part that makes it work. In stock in Australia, ready to drop into your next install

• Extends DVI video (1920×1200) and USB 2.0 up to 100 m on a single Cat 5e/6 cable
• 3× ExtremeUSB 2.0 ports for peripherals, touch panels, or portable-to-desktop file transfer
• HDBaseT technology for reliable long-run video without signal degradation
• One-cable solution — no separate video and USB runs to route through the ceiling or under the floor
• Purpose-built for kiosks, medical stations, transport hubs, and industrial control rooms