ATEN 2A-145G 10GbE Copper SFP+ Transceiver (2-Pack) – Cat 6a/7, Up to 30 Metres

You've got a KVM switch with SFP+ ports and a run of Cat 6a cable, but no 10GbE link. You don't need a fibre patch panel or a $400 DAC cable for a 20-metre drop. This ATEN transceiver slots straight into the SFP+ port on your KG0016 or KG0032, terminates on a standard RJ-45, and gives you a clean 10 Gbps connection over the copper you already have. Two in the box, so you can wire both ends of a link without hunting for a second module. No driver installs, no config gymnastics – drop it in, patch the cable, done. If your office is 25 metres from the rack and the national chain says 'back in three weeks,' this is on our shelf now

• 10 Gbps data rate over standard Cat 6a or Cat 7 copper cabling
• Cable runs up to 30 metres – no fibre, no active cooling
• SFP+ form factor; drops directly into ATEN KG0016 and KG0032 ports
• Two transceivers per pack – enough for a full point-to-point link
• Cost-effective short-reach 10GbE alternative to fibre or DAC cables