MSI SPATIUM M571 DLP 4TB PCIe 5.0 NVMe M.2 SSD – 14,500 MB/s Read

You're not slow. Your storage is. That 4K project render, the 80 GB game install, the 3-hour backup that's been running since lunch — all of it bottlenecks on a drive that can't keep up with what you're actually doing.

The MSI SPATIUM M571 DLP fixes that. PCIe 5.0 x4, NVMe 2.0, Phison E28 controller, 4 GB LPDDR4 DRAM cache, and 3D NAND in a standard M.2 2280 slot. Sequential read hits 14,500 MB/s. Write lands at 11,000 MB/s. Random 4K IOPS sit at 2.6 million in both directions.

Drop it into any PCIe Gen 5, 4, 3, 2, or 1 motherboard — it backs down to whatever your board supports, so you're not locked out if the rest of the system isn't Gen 5 yet. Form factor is 80 × 22 × 2.15 mm. Max operating power is 6.5 W.

Endurance is rated at 2,800 TBW with an MTBF up to 1,500,000 hours. MSI backs it for 5 years or the TBW limit, whichever hits first.

Five units on the shelf right now. If you need it before the next render deadline or the next client delivery, this is the drive that gets out of your way

• PCIe Gen 5 x4 / NVMe 2.0 interface with backward compatibility to Gen 1
• Sequential read up to 14,500 MB/s, write up to 11,000 MB/s
• Phison E28 controller with 4 GB LPDDR4 DRAM cache and 3D NAND flash
• 2,800 TBW endurance, MTBF up to 1,500,000 hours, 5-year limited warranty
• Standard M.2 2280 form factor (80 × 22 × 2.15 mm), max 6.5 W operating power
• Wear leveling, bad-block management, over-provisioning, TRIM and SMART support