You've got a drive full of data and no way to read it. Dead laptop, old desktop HDD, or a new NVMe SSD sitting in a box. You don't need a tech shop's three-day turnaround. You need to plug it in and go.
The SA536 does both jobs. Flip the toggle to SATA for your 2.5" or 3.5" hard drive. Flip it again for NVMe or SATA M.2 SSDs (2230, 2242, 2260, 2280). One adapter, two sockets, no driver install, no fuss.
USB 3.2 Gen2 gives you up to 10Gbps transfer speed. UASP and TRIM are built in, so your SSD writes faster and lasts longer. The LED tells you at a glance whether it's powered and whether data is moving.
Running a 2.5" drive or M.2 SSD? USB powers it. No extra cable. Running a 3.5" HDD? Plug in the included DC 12V 2A adapter first, then the USB cable. That order matters – connect USB before power on a 3.5" drive.
Works out of the box on Windows 7 and later, Mac OS 10.8 and later. ABS housing, 49 g without the power brick. Pockets in your bag, not under your desk.
In the box: adapter, AC power adapter, USB-C to USB-A cable, USB-C to USB-C cable, rubber standoff for M.2, and a manual. Grab one, read that drive, get back to work
| brand | SIMPLECOM |
| model | SA536 |
| interface | USB-C (USB 3.2 Gen 2) |
| transfer_rate | up to 10Gbps |
| nvme_slot_support | NVMe or SATA M.2 SSD (2230 / 2242 / 2260 / 2280) |
| sata_slot_support | 3.5" or 2.5" SATA HDD/SSD, SATA I/II/III |
| main_material | ABS Plastic |
| power_input | DC 12V 2A |
| dimensions | 108 x 44 x 24 mm (LxWxH) |
| weight | 49 g (without power adapter) |
| supported_os | Windows 7 and above, Mac OS 10.8 and above |
| package_contents | 1x USB to SATA and M.2 Adapter, 1x AC Power Adapter, 1x USB-C to USB-A Cable, 1x USB-C to USB-C Cable, Rubber Standoff for M.2 SSD, User Manual |
| external_power_required_for_3_5_hdd | 1 |
| simultaneous_sata_and_m2_use | Not supported – use toggle button to select SATA or M.2 mode |
