Panel's built, wiring's in, and you need a connector that screws into the faceplate without wobble or a gap where dust gets in. This CA Series panel plug is made for that. 6-pole plus pre-engaging earth, <5 mΩ contact resistance, Polyamide 6.6 housing rated -40 °C to +100 °C. Screw-clamp strain relief with a 9 mm gland nut keeps the cable secured at the entry point. Mates with Hirschmann C16-1 Series or similar connectors. Drop it in, tighten the gland, done
| brand | Jaycar |
| sku | PP1002 |
| series | CA Series (Hirschmann C16-1 or similar) |
| pole_configuration | 6 Pole + PE (pre-engaging earth) |
| contact_resistance | <5 mΩ |
| temperature_range | -40 °C to +100 °C |
| housing_material | Polyamide 6.6 |
| strain_relief | Screw clamp / Ring and Gland Nut (9 mm) |
| mounting_type | Panel mount (faceplate) |
| category | Electronics & Components > Cables & Connectors |
