Jaycar High Power DC Motor – 9,200 RPM, 6.5kg/cm Stall Torque, 12V

You don't need the fastest spinner on the shelf. You need the one that actually pulls. This Jaycar 12V DC motor trades a little top-end speed for serious grunt: 6.5kg/cm of stall torque at 63A. Rated at 9,200 RPM under load and pushing up to 10,200 RPM unloaded, it sits in the sweet spot where you still get usable speed but the motor isn't fighting a heavy load every second. Ferrite magnet core, hard steel drive shaft, built in an ISO 9002 environment. If your application is a winch, a small pump, a conveyor, or anything where the motor has to push against resistance without stalling out, this is the one to spec. Wire it for 12V, mount it, and stop worrying about the motor giving up halfway through the job

• 6.5kg/cm stall torque — the highest in this range for load-heavy applications
• 9,200 RPM rated speed with up to 10,200 RPM unloaded
• 12V DC operating voltage for straightforward wiring to standard 12V systems
• Hard steel drive shaft holds alignment under sustained torque loads
• Ferrite magnet core with ISO 9002 quality build for consistent long-run performance