Gigabit PoE Injector – 35W Power Over Ethernet, Up to 100m (YN8040)

Your IP camera, VoIP phone, or access point is at the far end of a long cable run and there's no power point within reach. Drilling a new socket isn't happening this week. This injector solves it: plug your switch into the Ethernet IN port, run the cable out, and the PoE OUT port delivers both data and 52VDC power down that single Cat5e/Cat6 cable – up to 100 metres. No second cable, no power brick at the far end, no electrician. Supports IEEE 802.3af and 802.3at, so it handles standard PoE and PoE+ devices. Gigabit throughput means your camera streams or your phone rings without lag. 100–240VAC input, so it works on any Australian wall socket. One small box between your switch and the problem, and the problem goes away

• Delivers 35W PoE power over a single Ethernet cable up to 100m
• Gigabit network throughput for cameras, phones, and access points
• IEEE 802.3af and 802.3at compliant – supports PoE and PoE+ devices
• 1 x RJ45 Ethernet IN, 1 x RJ45 PoE OUT – simple two-port setup
• 100–240VAC input, 52VDC / 0.67A output – works on any AU wall socket
• Eliminates the need for a separate power point at the device end