Jaycar Brass Fuel Fitting – 1/4" NPT to 10mm Barb – MGC715

Same mismatched-thread headache, different hose size. Your NPT port wants a thread, your 10mm fuel hose wants a barb, and the gap is leaking fuel onto the floor.

This Jaycar brass fitting closes that gap. 1/4" NPT thread on one end, 10mm barb on the other. Machined from solid bar stock so the threads are clean and the barb seats properly under a clamp.

Thread it in, push the hose onto the barb, fit a hose clamp. If it weeps, back off, add thread tape or a dab of joint compound, redo it. If it's dry, you're done.

RRP $12.64. Add to cart and get that line sealed before the next fire inspection

• 1/4" NPT threaded end (American non-metric standard) mates with 10mm barb hose end
• Machined from solid brass bar stock for a clean, leak-tight seal
• Barb end takes standard fuel hose – push on and secure with a hose clamp
• Compatible with thread tape or pipe compound if the joint weeps
• Jaycar MGC715. RRP $12.64