You've printed the prop, the ornament, the little display piece — and it looks flat. Matte PLA just doesn't give you that lustrous, satin-smooth finish you're after. eSUN's Silver eSilk changes that. It's a modified PLA+ formula that lays down a glossy, metallic-sheen surface straight off the bed. The cosplay community leans on this range for exactly that reason. It prints easy — 190–230°C nozzle, bed from 0 to 80°C — and it's 100% biodegradable, so you're not sitting on a shelf full of plastic guilt. One practical note: store it in an airtight container away from humidity. The silk formula picks up moisture faster than standard PLA and can turn brittle if left out. Keep it sealed, keep it dry, and the prints stay smooth
| brand | JAYCAR |
| material | Modified PLA+ (PolyLactic Acid) – eSilk formula |
| colour | Silver (glossy/satin) |
| weight | 1 kg |
| diameter | 1.75 mm |
| biodegradable | 1 |
| recommended_nozzle_temp | 190–230°C |
| recommended_bed_temp | 0–80°C |
| recommended_print_speed | 30–90 mm/s |
| movement_speed | 90–150 mm/s |
| compatible_printers | Open-source desktop and industrial 3D printers |
| storage_note | Airtight, humidity-controlled storage recommended to prevent brittleness |
