Jaycar 2 Gauge Tinned Battery Power Lead – Red – 750mm

Your inverter's a metre away from the battery, or the sub amp is tucked under a bench and the positive run needs to be long enough to route cleanly without a sharp bend. This 750mm red lead gives you that reach without cutting and re-crimping. Tin-plated copper wire shrugs off salt spray and humidity. Lugs are pre-crimped, sealed with red heatshrink so polarity is obvious at a glance. 160A peak under 300 minutes, 140A constant. PVC insulation stays flexible when the workshop's at 8 degrees in July. Unbox, connect, done

• 2 gauge tin-plated copper wire – rated for marine and high-corrosion environments
• Readymade with tin-plated copper lugs (10mm inner / 19.3mm outer dia) crimped at both ends
• Red colour-coded heatshrink finish on each lug for positive-lead identification
• 160A peak current capacity (under 300 min) / 140A constant
• PVC insulation for flexibility in cold and damp conditions
• 750mm length – suits extended runs to inverters, amplifiers, or remote loads