Jaycar 3 Pole PC Mount Pluggable Header – 5.08mm Pitch – Horizontal Plug

You've got a bare PCB and need a clean connection point for your terminal block. No fiddly wire splicing, no half-soldered joints that pull loose in week two. This three-pole header drops straight into your board, you solder the pins, and your pluggable terminal block clicks home. Five-point-eight millimetre pitch, horizontal orientation so it sits flat against the board edge. Polyamide66 housing carries a UL94V-0 fire rating, the pins are 1.0mm tin-plated brass, and the PCB holes are 1.5mm across. Solder it once, plug in your block, and walk away. Add to cart and it's on its way to your workbench

• 3-pole configuration for compact signal or low-current power connections
• 5.08mm (0.200 inch) pin pitch matches standard pluggable terminal blocks
• Polyamide66 housing rated UL94V-0 for flame resistance
• 1.0mm tin-plated brass solder pins for reliable, low-resistance joints
• PCB through-hole diameter 1.5mm – no need to ream or chase
• Horizontal plug orientation sits flush against the board edge