Jaycar 6 Pole PC Mount Pluggable Header – 5.08mm Pitch – Horizontal Plug

Three poles wasn't enough and you're not rewiring the whole harness for six. This six-pole header gives you the extra channels without changing your board layout. Solder the pins, seat your pluggable terminal block, and you're connected. Five-point-eight millimetre pitch, horizontal so it runs parallel to the board surface. The housing is Polyamide66 with a UL94V-0 fire rating, pins are 1.0mm tin-plated brass, and PCB holes are 1.5mm. Grab one, solder it in, and stop chasing loose jumpers. Add to cart

• 6-pole configuration for expanded signal or multi-channel power runs
• 5.08mm (0.200 inch) pin pitch matches standard pluggable terminal blocks
• Polyamide66 housing rated UL94V-0 for flame resistance
• 1.0mm tin-plated brass solder pins for solid, low-resistance joints
• PCB through-hole diameter 1.5mm – standard drill, no modification needed
• Horizontal plug orientation sits flush against the board edge