Jaycar Sealed Polycarbonate Enclosure 115 x 65 x 40mm IP65 NEMA 4 with PCB Guide Slots

Your project board is a bit bigger than the small box can handle, and you still need that IP65 seal. This Jaycar enclosure is 115 x 65 x 40mm — enough room for a decent PCB assembly mounted vertically on the internal guide slots. Same tongue-and-groove lid with EPDM gasket, same M-4 stainless steel screws into brass inserts. Wall mounting holes sit outside the sealing area, so you bolt it to the wall without compromising the seal. Handles -40C to 125C. Optional external mounting plate (4pc) and hinge kit (2pc) available separately. RRP $21.14

• IP65 (IEC 529) and NEMA 4 rated — dust-tight and hose-proof
• Tongue-and-groove seal with EPDM gasket; mounting holes outside the sealed area
• M-4 stainless steel non-magnetic screws into threaded brass inserts
• Internal guide slots for vertical PCB assembly mounting
• Optional external mounting plate (4pc) and hinge kit (2pc) in thermoplastic
• Dimensions 115 x 65 x 40mm, light grey polycarbonate, -40C to 125C