Jaycar 25K Ohm Linear (B) Double Gang 24mm Potentiometer – PCB & Panel Mount

The pot you keep hunting for because the 10K doesn't give you the range and the 100K overshoots. This 25K linear double gang fills that gap. Same build as the rest of the line — 24mm body, 6.35mm shaft with a flat for your knob, 38mm of shaft length. Solder it in and it holds. Six contact points on phenolic, centre pin offset so your traces don't fight each other. Panel-mount it with the 3/8" 32 T.H.D. bush and it's locked. No extra standoffs, no epoxy, no 'I'll add a bracket later.' Pins take screened cable if you're wiring by hand. 0.5W max. Standardised design with a published engineering drawing for your PCB layout

• 25K Ohm linear (B) taper, double gang, 24mm diameter
• Self-holding PCB mount — six contact points, no extra mechanical fixing needed
• 6.35mm shaft with 25% flat for grub-screw or interference-fit knob, 38mm long
• 3/8" 32 T.H.D. bush for secure panel mounting
• Pins sized to terminate screened cable for hard-wired builds
• 0.5W max power rating