High-impedance input stage, sensor circuit, or gain trim that needs a 1M ohm linear sweep? This Jaycar single-gang 9mm pot covers it. 50VAC rated, under 100mV slider noise, and a clean 300° rotation with 20–250gf·cm torque. No crackle, no drift. Solder it in and recalibrate
| brand | Jaycar |
| resistance | 1M Ohm |
| taper | Linear (B) |
| gang | Single |
| body_diameter | 9mm |
| rated_power | 0.05W |
| rated_voltage | 50VAC |
| slider_noise | <100mV |
| insulation_resistance | >100MΩ at 250VDC |
| dielectric_strength | 300VAC/minute |
| tracking_error | Within 3dB at 40~0dB |
| rotation_angle | 300° ±5° |
| rotation_torque | 20–250gf·cm |
| shaft_stop_strength | 5kgf·cm/min |
