You need a mic input on your board but don't want to fuss with solder joints. This Jaycar omnidirectional microphone insert plugs in via 10mm pins — drop it into your header, apply power, done. Runs 1.5V to 10VDC, sips under 0.5mA, and keeps signal-to-noise above 56dB. The same component OEMs spec, just with a pin footprint instead of solder tabs. Power on, mic live
| brand | JAYCAR |
| sku | AM4011 |
| category | ELECTRONICS & COMPONENTS |
| subcategory | AUDIO & VISUAL EQUIPMENT |
| pickup_pattern | Omnidirectional |
| power_range | 1.5V – 10VDC |
| current_consumption | <0.5mA |
| sn_ratio | >56dB |
| pin_length | 10mm (+/- 0.5mm) |
