You've got more gear in that rack than the last UPS could carry, and you know it. This APC Easy UPS On-Line handles 2700W of continuous load in a 2U footprint — no 4U footprint hogging space you need for switches or storage. Pure sine wave, double-conversion on-line, zero transfer gap between mains and battery. Six C13 outlets plus one C19 for the higher-draw device. Four minutes twenty-four seconds at 2400W load gives you time to close sessions, commit writes, and power down in sequence. Slot in a management card and track health from your existing NMS. Rail kit included. Plug it in, rack it up, done
| 0 | 1× IEC C19 to Schuko power cable |
| 1 | 1× IEC C13 to C14 power cable |
| 2 | 1× USB cable |
| 3 | 1× RS-232 configuration cable |
| 4 | 1× rack mounting bracket set |
| 5 | 1× rack mounting support rails |
| 6 | User manual |
| brand | APC |
| model_range | Easy UPS On-Line |
| rated_power_va | 3000 VA |
| rated_power_w | 2700 W |
| rack_units | 2U |
| topology | Double-conversion on-line |
| waveform | Pure sine wave |
| input_voltage | 230 V (220–240 V range) |
| output_voltage | 230 V (220–240 V range) |
| input_connector | IEC 60320 C20 |
| output_connectors | 6× IEC 60320 C13, 1× IEC 60320 C19 |
| runtime_at_2400w_load | 4 min 24 s |
| min_max_load | 240–2400 W |
| replacement_battery | APCRBCV202 |
| compatible_nmc | AP9544, SRVSMB001, VGL9901I |
| management_connections | USB, RS-232, Intelligent Card Slot |
| bypass | Automatic and manual built-in |
| operating_temperature | 0–40 °C |
| storage_temperature | -20–50 °C |
| humidity_operating | 0–95% non-condensing |
| altitude_operating | 0–3000 m |
| acoustic_level | 50 dBA |
| heat_dissipation | 910 Btu/h |
| ip_rating | IP20 |
| mounting_mode | Rack mounted |
| cable_length | 1.48 m |
