The server room goes dark at 6pm on a Friday. Your network drops. The whole team stares at a dead screen. You need power that doesn't quit when the grid does.
This APC Smart-UPS SMT3000RMI2UNC is built for exactly that moment. A 3kVA line interactive unit that delivers pure sine wave output to your switches, servers, and storage through brownouts and full outages. The 2U rackmount form factor slots straight into your existing cabinet — no desk clutter, no daisy-chained power strips.
You get 8× IEC C13 outlets plus 1× IEC C19 for higher-draw equipment. AVR smooths voltage dips before they reach your hardware. The LCD gives you a real-time readout of load, battery health, and input voltage. No guesswork.
Cloud-based monitoring sends you an email the second something drifts. Firmware updates push over the network through the SmartSlot. Nobody has to crawl under the rack to check on it.
The lead-acid battery is a user-replaceable RBC43 cartridge. When it's time, you swap it yourself. No engineer call-out, no downtime window booked in.
In the box: rack mounting hardware, support rails, USB cable, and input cables for BS1363A, IEC C20, and Schuko CEE 7/EU1-16P. Three IEC jumper cables included. Power cable not included.
At full 2700W load you get roughly 3 minutes of runtime — enough to shut down cleanly or bridge to a generator. Drop the load to 270W and that window stretches out considerably.
Plays nice with APC bypass panels (SBP3000RMHW, SBP3000RMI), PDUs from AP6003A through AP7552, environmental sensors (AP9335T, AP9335TH), and network management cards from AP9613 to AP981. Mounting accessory AP9625 also supported.
Add it to your cart and get your rack sorted before the next blackout finds you
| 0 | SBP3000RMHW |
| 1 | SBP3000RMI |
| 0 | AP6003A |
| 1 | AP6015A |
| 2 | AP6020A |
| 3 | AP6120A |
| 4 | AP7552 |
| 0 | AP9335T |
| 1 | AP9335TH |
| 0 | AP9613 |
| 1 | AP9620 |
| 2 | AP9640 |
| 3 | AP9641 |
| 4 | AP9643 |
| 5 | AP981 |
| 0 | AP9625 |
| brand | APC |
| model | SMT3000RMI2UNC |
| type | Line Interactive UPS |
| capacity_va | 3000 VA |
| capacity_w | 2700 W |
| form_factor | 2U Rackmount |
| input_voltage | 230V (also 220V, 240V) |
| output_voltage | 230V (also 220V, 240V) |
| waveform | Pure Sine Wave |
| avr | 1 |
| outlets_iec_c13 | 8 |
| outlets_iec_c19 | 1 |
| jumper_cables | 3 |
| input_connection | IEC 320 C20, BS1363A, Schuko CEE 7/EU1-16P |
| battery_type | Lead-acid (RBC43) |
| battery_replacement | User-replaceable RBC43 cartridge |
| display | LCD |
| monitoring | Cloud-based via SmartSlot / SmartConnect Port |
| acoustic_level | 55 dBA |
| heat_dissipation | 348 Btu/h |
| operating_temp | 0 to 40 °C |
| storage_temp | -15 to 45 °C |
| operating_altitude | 0 to 10,000 ft |
| storage_altitude | 0 to 15,240 m |
| humidity | 0–95% (non-condensing) |
| cable_length | 2.00 m |
| cable_count | 1 |
| included | Rack mounting hardware, support rails, USB cable, BS1363A/IEC C20/Schuko input cables, 3× IEC jumper cables |
| not_included | Power cable |
| runtime_at_full_load | 3 min 11 s at 2700W |
| min_runtime_load | 270 W |
